$29
ASTM A348/A348M-05(2021)
2021
Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
- Format:
- Language(s) :
- Published :
- English
- 06/01/2021
1.1''This test method covers the determination of the magnetic properties of flat-rolled magnetic materials using Epstein test specimens with double-lap joints in the 25-cm Epstein frame. It covers determination of core loss, rms and peak exciting current, exciting power, magnetic field strength, and permeability. This test method is commonly used to test grain-oriented and nonoriented electrical steels but may also be used to test nickel-iron, cobalt-iron, and other flat-rolled magnetic materials.
1.2''This test method shall be used in conjunction with Practice A34/A34M and Test Method A343/A343M.
1.3''Tests under this test method may be conducted with either normal ac magnetization or with ac magnetization and superimposed dc bias (incremental magnetization).
1.4''In general, this test method has the following limitations:
1.4.1''Frequency'''The range of this test method normally covers frequencies from 100 to 10'''000 Hz. With proper equipment, the test method may be extended above 10'''000 Hz. When tests are limited to the use of power sources having frequencies below 100 Hz, they shall use the procedures of Test Method A343/A343M.
1.4.2''Magnetic Flux Density'' (may also be referred to as Flux Density)'''The range of magnetic flux density for this test method is governed by the test specimen properties and by the available instruments and other equipment components. Normally, for many materials, the magnetic flux density range is from 1 to 15 kG [0.1 to 1.5 T].
1.4.3''Core Loss and Exciting Power'''These measurements are normally limited to test conditions that do not cause a test specimen temperature rise in excess of 50''C or exceed 100 W/lb [220 W/kg].
1.4.4''Excitation'''Either rms or peak values of exciting current may be measured at any test point that does not exceed the equipment limitations provided that the impedance of the ammeter shunt is low and its insertion into the test circuit does not cause appreciably increased voltage waveform distortion at the test magnetic flux density.
1.4.5''Incremental Properties'''Measurement of incremental properties shall be limited to combinations of ac and dc excitations that do not cause secondary voltage waveform distortion, as determined by the form factor method, to exceed a shift of 10'''% away from sine wave conditions.
1.5''The values and equations stated in customary (cgs-emu and inch-pound) or SI units are to be regarded separately as standard. Within this standard, SI units are shown in brackets except for the sections concerning calculations where there are separate sections for the respective unit systems. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with this standard.
1.6''This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7''This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A348/A348M-05(2021) | |
|---|---|
| STANDARD INFO: | |
| Standard Name | ASTM A348/A348M-05(2021) |
| Scope | Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame |
| Publisher | ASTM - ASTM International |
| Languages | English |
| State | |
| Publication Year | 2021 |
| Most recent Version | MOST RECENT |
| Whether to be replaced | |
| Addendum | |
| FILE INFO: | |
| File Size | 1 file , 220 KB |
| Note | This product is unavailable in Russia, Ukraine, Belarus |
| Number of Pages | 11 |
| Published | 06/01/2021 |
| ASTM A348/A348M-05(2021) | ||
|---|---|---|
| History | Publisher Year | |
| ASTM A348/A348M-05(2021) | 2021 | Current |
| ASTM A348/A348M-05(2015) | 2015 | |
| ASTM A348/A348M-05(2011) | 2011 | |
| ASTM A348/A348M-05 | 2005 | |
| ASTM A348/A348M-00 | 2000 |
Related products
- Format:
- Language(s) :
- Published :
- English
- 12/01/2023
$34
- Format:
- Language(s) :
- Published :
- English
- 10/01/2022
$31
- Format:
- Language(s) :
- Published :
- English
- 10/01/2022
$25
- Format:
- Language(s) :
- Published :
- English
- 10/01/2011
$30
Over 3,000,000 global standards
Our standards library is extensive, with over 2 million documents, ensuring we meet the needs of various industries. Whether it’s ASME, DIN, ASTM or ISO and other internationally recognized standards, we offer complete documents and the latest versions to help customers adhere to industry regulations in their projects. Whether your needs are technical standards, regulatory requirements, or design guidelines, our standards library provides comprehensive support.
24 online customer service
Our team includes up to 50 engineers from fields such as healthcare, electronics, and construction, who can answer your technical questions and ensure you find the correct and accurate standard documents. We are dedicated to helping you find the best solution that meets your needs.
Thanks to the StandardsClub customer service team for helping me find the ASME BPVC-2023 SET I was looking for in a high-quality PDF version. Their assistance was excellent, and the document quality exceeded my expectations!
This standard document is very detailed, covering all relevant technical points, and provides comprehensive guidance for my project. The ANSI/NEMA Z535 SET was exactly what I needed, and I am very satisfied with the quality!
The purchasing process was straightforward, the price was very competitive, and the download was quick. The Tissue Engineering Standards Addressing Product Quality and Characterization Package was of excellent quality and provided all the information I needed. Definitely a great value for the price!
“Got questions? Our professional customer service is ready to assist you anytime. Whether it’s finding documents, getting discounts, or navigating the purchase process, let us help you get the standards you need!”
Sign Up Our Newsletter
Don’t miss out! Subscribe now to get exclusive offers and industry insights!
We care about your data in ou privacy policy.
