CGA V-7

This standard applies to the selection of a suitable cylinder valve outlet connection for industrial, specialty, and semiconductor gas mixtures for pressures up to 3000 psi at 70 °F (20 680 kPa at 21.1 °C). It applies to cylinders filled for individual use, cylinders filled individually for the purpose of assembling into a cylinder bundle, and for all cylinder bundle manifold outlet connections.

This standard does not apply to cylinders contained within an assembled cylinder bundle filled as one individual unit by use of the cylinder bundle manifold outlet connections. It also does not apply to medical gas mixtures (see CGA V-7.1).

For the assignment of ultra high integrity service (UHIS) connections for mixtures, see Appendix A. Appendix A is reproduced with permission from International Organization for Standardization (ISO) 10692-1:2001, Gas cylinders—Gas cylinder valve connections for use in the micro-electronics industry—Part 1: Outlet connections.

For the purpose of this standard, a mixture is understood to be the purposeful combination of two or more components. An odorant shall be considered a component when added to either a pure gas or a mixture. Blanketing of a pure gas or mixture is not considered the generation of a new mixture. However, the effect of the pressure increase needs to be considered when determining the FTSC code.

The purpose of this standard is to establish a method for selecting the proper cylinder valve outlet connection for mixtures of two or more industrial gases. This standard does not attempt to identify which gas mixtures can be manufactured safely and successfully as this is the responsibility of the mixture manufacturer. Further, it does not describe any means or techniques for making mixtures.